ONYX FACE THREAD LIFT
What is thread lifting?
Onyx Thread Lift Methods
Onyx silk is innovation in making Molding thread, which was invented and developed in Korea. Threads are designed to look different from common threads,
which can be designed to have larger barbs and threads, be able to pull and lift more than common threads.
Molding thread can adjust V-shaped face, help slim the face, tighten the sagging skin, look naturally younger.
Barbed thread is characterized by 2-directional arrow head, helping to slim the face, lift and tighten the face more effectively than common threads.
Helping stimulate more collagen with the results of lifting, tightening that can last up to 5 years. Apart from making the face look older than age,the problems of big face, sagging skin, not looking firm also make an aspiration to have V-shaped face, slim face collapse too.
These big obstacles have worried many women. These problems can be easily corrected with Onyx silk. V-shaped face threading helps to lift, tighten, slim the face, helping women to have V-shaped face of their dream.
Thread lifting program onyx
Who is it suitable for?
Onyx thread lifting is suitable for those with very sagging skin. Because the silk is more effective in lifting and tightening than general threads. and can maintain results for up to 5 years longer than conventional silk
Threading Onyx can keep the face frame tighter. help make the face smaller As a result, the face frame looks clearer as well.
The work of Onyx silk helps to reduce wrinkles. Deep grooves can be up to 2 ways, which is to immediately lift and tighten deep wrinkles. and can stimulate collagen under the skin layer Helps the skin look fuller after 1-2 months of thread lifting as well.
Thread lifting can stimulate collagen under the skin layer. and increase the flexibility of elastin Suitable for patients with shabby skin, not bright, to return to have full, plump, luscious skin again.
Thread lifting can stimulate collagen under the skin layer. and increase the flexibility of elastin Suitable for patients with shabby skin, not bright, to return to have full, plump, luscious skin again.
Thread lifting Onyx can lift the face to make it look slimmer, the face looks more V-chef.
Threading Onyx Silk at Waleerat Clinic
What’s so special?
Characteristics of Onyx silk is a melted silk made of PDO material (Polydioxanone) in the form of casting silk or Molding, length 10 cm. stimulate collagen and can be lifted in all directions Designed for use with blunt-tipped needles or L-Type makes thread threading without swelling, bruising and safety.
Properties of Onyx Silk
• face lift
• reduce sagging skin
• Tight skin, not wrinkled
• reduce wrinkles
• smooth skin
• V-chef face shape adjustment
• slim face, small face
• Results last for 5 years
3 advantages of threading a slender face
1. Adjust the shape of the face to be slender. get a picture of V Chef’s face
Onyx thread lifting will help slim face shape in 1-2 months after thread lifting. and will be able to stay with the patient for up to 5 years
2. Fix sagging skin Helps the skin to be firm and firm
Threading Onyx will be able to create collagen and elastin. which makes the patient’s face look fuller Look and feel like a young woman again.
3. Reduce wrinkles, help deep grooves to be noticeably better.
Effectively slowing down wrinkles And there are still results of youthfulness even after 5 years.
Comparison of cutting silk and molding silk
cutting silk
1.Silk thread cutting method is used to cut the silk needles into the silk thread. Make the silk fragile, easily torn if the needles are not cut properly. can tear silk
2.Cutting silk threads. Silk has a small line. Therefore, the tensile strength of the silk is not very high. because if too much force is applied Silk is easily broken.
3.Since silk threads are cutting threads, usually the treating doctor doesn’t need to have knowledge of thread lifting. Molding can perform thread lifting.Since silk threads are cutting threads, usually the treating doctor doesn’t need to have knowledge of thread lifting. Molding can perform thread lifting.
4.general thread threading Most often seen using a pointed needle. like a syringe in threading So there is a chance of swelling and bruising very easily.
molding silk
1.Molding silk threads are used to cast silk threads. to have specific characteristics as desired, such as adding silk spines without cutting like a cutting method
2.Molding silk has bigger lines. more strength Not easy to break like a cutting design, designed to have higher tensile strength. Makes the face lift better.
3.Must be done by a doctor who has a specific expertise. because the silk is large The doctor must determine how long the thread is placed at the proper depth. to prevent the threads from appearing after threading
4.Thread threading Onyx is designed to be used with blunt-tip needles with L-Shape needles to cause swelling and bruising after thread threading. It is much less common than thread-threading with a normal needle.
1.Silk thread cutting method is used to cut the silk needles into the silk thread. Make the silk fragile, easily torn if the needles are not cut properly. can tear silk
2.Cutting silk threads. Silk has a small line. Therefore, the tensile strength of the silk is not very high. because if too much force is applied Silk is easily broken.
3.Since silk threads are cutting threads, usually the treating doctor doesn’t need to have knowledge of thread lifting. Molding can perform thread lifting.Since silk threads are cutting threads, usually the treating doctor doesn’t need to have knowledge of thread lifting. Molding can perform thread lifting.
4.general thread threading Most often seen using a pointed needle. like a syringe in threading So there is a chance of swelling and bruising very easily.
1.Silk thread cutting method is used to cut the silk needles into the silk thread. Make the silk fragile, easily torn if the needles are not cut properly. can tear silk
2.Cutting silk threads. Silk has a small line. Therefore, the tensile strength of the silk is not very high. because if too much force is applied Silk is easily broken.
3.Since silk threads are cutting threads, usually the treating doctor doesn’t need to have knowledge of thread lifting. Molding can perform thread lifting.Since silk threads are cutting threads, usually the treating doctor doesn’t need to have knowledge of thread lifting. Molding can perform thread lifting.
4.general thread threading Most often seen using a pointed needle. like a syringe in threading So there is a chance of swelling and bruising very easily.
4 steps, face threading, slim face
Onyx Thread Lift Program
1. Clean the face.
The staff will clean the face to prepare the skin for the tea lift. and continue threading.
2.Apply anesthetic
The staff will apply anesthetic to the face, leave it for 30-40 minutes, then massage the face to make the anesthetic work more effectively
3.set point of threadin
After the anesthetic has taken effect The staff will wipe the anesthetic off. Then draw a point where threads will be threaded on the face. and apply a disinfectant to prepare the silk threads.
4.Threading
The doctor will then use a large needle to pierce the skin to create a hole in order to thread the thread under the skin in the SMAS layer. After that, the doctor will cut the thread. then cover the waterproof plaster.
Before - after threading a slender face
FRONT
45°
90°
taking care of yourself before Silk Thread Onyx
Generally, threading can do without having to prepare in advance like a surgery But if the patient has additional questions, for example, the patient is taking certain medications regularly or have other congenital diseases can come and consult with Facial Designer of Waleerat Clinic
self care after Silk Thread Onyx
1. Do not allow the wound to come into contact with water for 24 hours by using a cotton pad moistened with water. or cleansing for wiping the face Wipe all over your face, excluding the area where the thread is threaded.
2. Refrain from moving the face in the thread threading area. Because in the early stages there may be pain and stiffness. But these symptoms will gradually disappear on their own.
3. Refrain from smoking and drinking alcoholic beverages. for at least 1 week due to smoking And alcohol will block the process of creating collagen in the body. reduce the efficiency of threading
4. Should not wash your face, rub your face or rub your eyes vigorously. Should gently touch your face. You can apply cream and make-up normally after 24 hours of thread lifting.
5. Vitamin C and collagen can be taken to stimulate collagen production. and elastin under the skin increase the efficiency of threading
6. Refrain from facial massage, facial spa treatment or any treatment for a period of 1 week to reduce inflammation of the face. after threading
Comparison of cutting silk and molding silk
details About threading Onyx Onyx Thread Lift Information
LENGTH OF THREADING
It takes approx.
20 – 30 minutes
pain relief medication
Anesthesia is applied along with massage to give effective anesthetic effect.
Silk cutting time
Thread lifting does not cause scars.
So there’s no cutting?
recuperation
Patients can go home. after surgery By refraining from allowing the wound to come into contact with water for 24 hours.
FOLLOW-UP TREATMENT
Update with the doctor 1 week after thread lifting and 1 month after thread lifting
duration of treatment
in some patients There may be a slight swelling or bruising, but the patient can lead a normal life
FAQ
- First of all, the thread threading mechanism This will result in an immediate lifting and tightening of the skin where the patient will see a clearer face shape. shallow cheek groove The wrinkles on the face are shallower. immediately after threading
- Second, about a week after threading, the threads will stimulate the contraction of fat tissue. resulting in firmer skin and will be noticeably firmer after 2 months after the procedure
- Third, thread lifting will promote collagen production. and the creation of new elastin It is like to renew your skin at the cellular level. Helps the skin look younger
All of these work together between the patient’s skin and the silk threads. There may not be much difference in results. Depending on internal and external factors such as diet, exercise, lifestyle, it also affects this outcome.
colorless polyester brought to knit up to have the characteristics of a line similar to silk, which this type of silk It will break down in your body after about 6 months.
At present, silk thread production for threading was developed to shape different faces to provide different results and performance as well
Thread lifting at Waleerat Clinic we use Onyx, a molding thread developed and developed in Korea. The silk thread is special and its uniqueness is large silk threads because of the production of silk Will it come out of the body? It is not the same as using cutting silk, which is the creation of silk spines. from notching into the silk One of the specialties of Onyx silk is effective in lifting more than general silk and can provide results for up to 5 years
Waleerat Clinic guarantees confidence with the No.1 Asia Face Lifting award and a customer base and reviews of thread lifting more than 10,000 cases over a period of more than 10 years, ready to give you an experience of rejuvenating your face, tightening, adjusting your V-chef face with results. Every silk weave is woven by hand and care. Layer by Layer face design by a professional medical teacher and passed the silk threading training by Cao Pha to create a beautiful face and the most natural
For slender face thread lifting or Onyx thread lifting, the patient has to assess the face shape with a medical teacher first. Due to the basic shape of each patient’s face There will be a need for a different number of silk threads. The doctor will assess the number of threads according to the results after thread lifting. and the needs of the patients as well If interested, ask for details on slender silk threads. You can contact Line to consult with Face Designer at Line : @waleerat click https://bit.ly/2Wu9smj or call for more information: 02-821-5400